Table of Contents
Advertisement
12. Follow these instructions when rack mounting the equipment.
— Maintain an environment compatible with the maximum rated operating
temperatures indicated in the FrameSaver SLV Technical Description . The
ambient temperature of equipment in a closed or multi-unit rack assembly may
be higher than the room temperature.
— Install the equipment in a rack such a way that the amount of air flow required
for safe operation of the equipment is not compromised.
— Mount the equipment in a rack in such a way that a hazardous condition is not
created due to uneven mechanical loading.
— Apply the equipment nameplate ratings to ensure that connection of the
equipment does not overload the supply circuits.
— Maintain reliable earthing of rack-mounted equipment, particularly if using
indirect connections to the branch circuit such as power strips.
13. This product contains a coin cell lithium battery that is only to be replaced at the
factory. Caution: There is a danger of explosion if the battery is incorrectly
replaced. Replace only with the same type. Dispose of used batteries according to
the battery manufacturer's instructions. Attention: Il y a danger d'explosion s'il y a
remplacement incorrect de la batterie. Remplacer uniquement avec une batterie du
même type. Mettre au rebut les batteries usagées conformément aux instructions
du fabricant.
EMI Notices
!
UNITED STATES – EMI NOTICE:
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case, the user
will be required to correct the interference at his own expense.
The authority to operate this equipment is conditioned by the requirements
that no modifications will be made to the equipment unless the changes or
modifications are expressly approved by Paradyne.
!
CANADA – EMI NOTICE:
This Class A digital apparatus meets all requirements of the Canadian
interference-causing equipment regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du
règlement sur le matériel brouilleur du Canada.
24
Advertisement
Table of Contents
