IBM 3270 Operator's Manual page 86

82
Printer Operation
that paper is needed. Also, when paper runs out, a control signal
is sent to the computer, indicating that an operator is needed at
the printer.
To insert paper, face the front of the printer and proceed as
follows: (It is not necessary to turn power off at the printer.)
1. Place your finger tips under the recessed front edge of
the top cover and lift upward.
2. Raise the plastic safety shield containing the print-
position indicator by pulling upward on the shield edge
near the platen.
3. Push the copy control lever back to allow maximum
opening between the print head and the platen.
4. Raise both doors covering the pin-feed mechanism at the
ends of the platen.
Figure 36. Printer with Forms Stand