Using Team Functions; Activating/Deactivating A Group Call - Siemens HiPath 2000 User Manual

Step by Step
Leave group?
Join group?
Leave group?
Join group?
301 X Group name

Using team functions

If configured (consult your service personnel), your tele-
phone is part of a team. The team consists of internal
phones that are able to use certain functions.

Activating/deactivating a group call

Special features must be taken into consideration
if your telephone operates with HiPath 5000 (sys-
tem networking via PC network)
If configured (consult your service personnel), you be-
long to one or more groups of stations, which can be
reached via hunt group or group call station numbers.
Incoming calls are signaled one after the other (= hunt
group) or simultaneously (= group call) on all phones in
the group, until a group member answers the call.
Each station in the group can still be reached via their
personal station number.
You can activate and deactivate the audible signal for a
hunt group, group call or individual trunks in a group.
You are part of a hunt group or call group
$
Open the idle menu
Select and confirm the option shown
or
select and confirm the option shown.
You belong to multiple groups
$
Open the idle menu
Select and confirm the option shown
or
select and confirm the option shown.
If an "X" appears between group/trunk number (such as
301) and group name, the audible tone is active for this
group or trunk.
[1] "Differing display view in a HiPath 4000 environment"
Using team functions
page 90!
page 18.
[1]
,
page 18.
[1]
,
page 100
85