Call Forwarding; Using Variable Call Forwarding - Siemens HiPath 2000 User Manual

Basic functions
Step by Step
Forwarding on?
1=all calls?
2=external calls only?
3=internal calls only?
Save?
Forwarding off
32

Call forwarding

Using variable call forwarding

You can immediately forward internal or external calls to
different internal or external telephones (destinations).
(External destinations require special configuration in
the system.)
When call forwarding is active, a special dial tone
sounds when you lift the handset.
If DID DTMF is active (contact your service per-
sonnel), you can also forward calls to this desti-
nation. Destinations: fax = 870, DID = 871,
fax DID = 872.
The call forwarding key flashes if you are a call
forwarding destination
Special features must be taken into consideration
if your telephone operates with HiPath 5000 (sys-
tem networking via PC network)
r
Press the key shown.
or
$
Open the idle menu
Select and confirm the option shown.
Confirm
or
select and confirm the option shown
or
select and confirm the option shown.
j
Enter the destination number.
Confirm.
Deactivating call forwarding
r
Press the key shown.
or
Select and confirm the option shown.
page 15.
page 91!
page 18.