Download  Print this page

Intended Use; Telephone Type; Speakerphone Quality And Display Legibility - Siemens HiPath 2000 User Manual

Hide thumbs

Advertisement

General information

Intended use

The OpenStage phone is a desktop or wall-mounted unit designed for
speech transmission and for connection to the LAN. Any other use is re-
garded as unauthorized.

Telephone type

The OpenStage 20 is available in three product variants, which differ in the
following points:
OpenStage 20 E
The suffix "E" stands for "economy".
You can perform "open listening" with the OpenStage 20 E
however, "speakerphone mode"
has a 10/100 Mbps Ethernet switch
OpenStage 20
OpenStage 20 has a "speakerphone mode"
has a 10/100 Mbps Ethernet switch
OpenStage 20 G
The suffix "G" stands for "Gigabit".
OpenStage 20 G has a "speakerphone mode"
also has a 1000 Mbps Ethernet switch
The identification details (exact product designation and serial number) of
your telephone can be found on the nameplate on the underside of the
base unit.
Specific details concerning your communications platform can be obtained
from your service technician.
Please have this information ready when you contact our service depart-
ment regarding faults or problems with the product.

Speakerphone quality and display legibility

10
To ensure good speakerphone quality (OpenStage 20/20 G only), the
area in front of the microphone (front right) should be kept clear. The
optimum speakerphone distance is 50 cm.
Proceed as follows to optimize display legibility:
– Turn the phone to tilt the display. This ensures you have a frontal view
of the display while eliminating light reflexes.
– Adjust the contrast as required
page 24 is not available. This variant
page 14.
page 24 and this variant also
page 14.
page 24 and this variant
page 14.
page 96.
page 26;

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: