25. Carefully push out the latches of the A-COVER ASSEMBLY, also
at the opposite side.
27. Lift up the FRONT KEYMAT ASSEMBLY.
29. Carefully open the flex foil connector with the SS-93.
31. Carefully open the connector of the CAMERA MODULE flex.
Page
14
(16)
CONFIDENTIAL
Copyright © 2007 NOKIA. All rights reserved.
26. If all clips are released, the A-COVER can be removed easily.
28. Lift up the LCD. Note that the LCD is still connected with the
flex foil.
30. Remove the LCD.
32. Peel up the MAIN FLEX ASSEMBLY. Once removed, it can not
be used again.
N810 RX-44
Service Manual Level 1&2
ISSUE 1