Mode Setting For The Controller - Toshiba Compliant Manager BMS-CM1280TLE Installation Manual

Compliant manager bms-cm1280tle
Table of Contents

Advertisement

Compliant Manager
5

MODE SETTING FOR THE CONTROLLER

Operation mode
Use SW1-<6> for the operation mode setting.
OFF side: Central control mode
This Compliant Manager is used as a central control unit.
Settings with the remote controller are inhibited by the setting of the Compliant Manager.
ON side:
Remote control mode
This Compliant Manager is used as a remote controller.
Settings with the Compliant Manager are inhibited by the setting of another central control unit.
Control group selection
Either simultaneous mode or an arbitrary range of a line and 16 groups (1 to 16, 17 to 32, 33 to 48, and 49 to 64)
can be selectively set.
All groups
Group 1 to 16
Group 17 to 32
LINE 1
Group 33 to 48
Group 49 to 64
Group 1 to 16
Group 17 to 32
LINE 2
Group 33 to 48
Group 49 to 64
Example:
When setting LINE 1 (group 1 to 32) in
the control group selection
* When the control group selection is used, only the set group range is displayed.
* The control group selection is available only for one line.
7-EN
DIP-SW1
<2>
<3>
OFF
OFF
ON
OFF
OFF
ON
OFF
OFF
OFF
OFF
ON
OFF
OFF
ON
OFF
OFF
OFF
OFF
ON
ON
– 8 –
<4>
<5>
OFF
OFF
OFF
OFF
OFF
OFF
ON
OFF
OFF
ON
OFF
OFF
OFF
OFF
ON
OFF
OFF
ON
OFF
OFF
Installation Manual
DIP-SW2
<5>
<6>
OFF
OFF
OFF
ON
OFF
ON
OFF
ON
OFF
ON
ON
ON
ON
ON
ON
ON
ON
ON
OFF
ON

Advertisement

Table of Contents
loading

This manual is also suitable for:

Compliant manager bms-cm1280ftle

Table of Contents