Connecting Network Cables To Transceiver Ports - HP ProCurve 8100fl Series Installation And Getting Started Manual

To remove a media converter:
1. Disconnect the network cable from the converter before removing it
2. Pull the extractor handle to remove the converter from the transceiver.

Connecting Network Cables to Transceiver Ports

To install fiber-optic cable:
■
Fiber Optic Transceiver
N o t e
To install copper cable:
1. Insert the copper cable connector into the copper transceiver port.
2. Push the handle forward to engage the locking mechanism.
Installing or Removing Transceivers and Connecting Cables
from the module.
Aligning the cable connectors with the slots of the transceiver ports, press
the cable connector into the transceiver port until it snaps into place.
To ensure proper transmit/receive connections, make sure the transmit
from one device is connected to the receive of the other device.
Copper Transceiver
Handle
Optical Media Converter
Replacing Hardware
4-11