Front View; Operator Controls - IBM 220 Service Manual

Model 220 4mm tape drive
Table of Contents

Advertisement

Front View

| | | | |
| | | |
|

Operator Controls

|
|
|
|
|
2
7206 Model 220 Service Guide
Figure 1 shows the front view of the 7206 Tape Drive.
Figure 1. Front View of the 7206 Model 220 4mm Tape Drive
1
Status lights
2
Unload button
The 7206 Model 220 4mm Tape Drive has the following operator controls.
Power Switch
The power switch ( 3 in Figure 1) is a push button switch that enables the power
to be turned on or off. Push and release the button to turn the power on, when it
is off, or off when it is on. When the 7206 Tape Drive is on, the power-on light 4
is on.
Note: The
symbol located beside the power switch is an International
Organization for Standardization (ISO) symbol for a push button switch.
Unload Button
The unload button 2 enables the tape cartridge to be ejected. The unload button
operates only when the 7206 Tape Drive power is on. To remove a cartridge, press
and hold the unload button for about one second.
3
Power switch
4
Power on light

Advertisement

Table of Contents
loading

This manual is also suitable for:

7206

Table of Contents