Clock Setting - Kenwood K23GSS10 Owner's Manual

When the microwave is connected to the mains power, the LED display will show
0:00, and it will sound once. Please ensure you have set the clock prior to use.
Please follow the steps below to set the clock.
1. Press the clock/pre-set and the hour
figures will flash.
2. Turn the time/power/weight
dial to adjust the hour figures. The
input time has to be within 0-23.
3. Press the clock/pre-set and the
minute figures will flash.
4. Turn the time/power/weight
dial to adjust the minute figures, the
input time has to be within 0-59.
5. Press the clock/pre-set again to
complete the clock setting.
: will start flashing and the time will
illuminate.
Kenwood K23GSS10_IB_GB_100315.indd 17

clock setting

1, 3, 5
2, 4
GB-17
3/15/10 4:05 PM