Removal Of Cf-51 (Cf-50) Board And Control Switch Block (Mr-8500)/(Mf-8500); Removal Of Evf Block-2; Mr-8500)/(Mf-8500) - Sony Handycam CCD-TRV3E Service Manual

2-6. REMOVAL OF CF-51 (CF-50) BOARD AND
CONTOROL SWITCH BLOCK (MR-8500)/(MF-
8500)
8 Flat cable (FFC-236)
CN001, 50P
4 Three tapping
3 Five tapping
screws
5 CF-51 board (3/3.5 inch model)
5 CF-50 board (2.5 inch model)

2-7. REMOVAL OF EVF BLOCK-2

3 Remove the EVF rear cabinet assembly
to the direction of arrow B .
2 Three screws (M2x3)
1 Tilt-up the EVF block to the direction of arrow A .
screws
7 Connector
CN003,2P
2 Control switch block (MF-8500)
CN002,8P (Manual focus model)
(CCD-TRV45E/TRV55E/TRV75/TRV75PK/TRV715 only)
2 Control switch block (MR-8500)
7 CRT assembly
B
A
9 Flate cable (FCC-235)
6 Ground
plate
1 Two tapping
screws
CN002,8P (Manual focus model)
(CCD-TRV23E/TRV65E/TRV769E only)
6 CRT holder assmebly
2 - 3
CN008,4P
4 VF electrostatic sheet
8 VF-99 board
5 Flexible flat cable(FCC-235)
CN901,4P