Basic Operation; Turning The Tv On And Off; Osd Menu Operations - RCA DECK15DR Owner's Manual

Basic Operation

Turning the TV On and Off

1
How to turn the TV on or off
1. Insert the power cord plug into a polarized AC
outlet.
2. Press POWER button on the remote control or
button on the LED TV.
3. Normal picture will be displayed on the screen after
6 seconds. If no signal input, "No Signal" will be
displayed on the screen.
4. If temporary POWER off is required, press POWER button on the remote control or
button on the LED TV.
5. If you want to completely switch off the power for this unit, unplug the power cord plug
for this unit.
6. After switching off the unit, you should turn on the TV again at least 5 seconds later.
Status indication lamp
Green: In power on mode.
Red: In standby mode.
Auto power off
If there is no signal input in any Mode, the TV will automatically accesses the standby
state in about 15 minutes.
Memory before turning TV off
The settings of picture and the preset channels will be memorized at turning off the unit.
When being started up again, the unit will work according to the mode set before being
turned off.
15

OSD Menu Operations

Adjust the OSD Screen
INPUT SOURCE
TV
AV
S-VIDEO
Component
DVD
HDMI
VGA
USB
BASIC OPERATION
Picture Mode < Standard
Contrast
Brightness
Color
Tint
Sharpness
Advanced Video
Select Move
Press MENU button to display the MAIN OSD MENU.
◀/▶
Press button to select the MENU you want.
▼/▲
Press button to enter the sub menu.
You can use MENU or EXIT button to save and return back to the previous menu.
▼/▲
Press button to select the option and then press
the value in the sub menu.
Press SOURCE button to display the
input source
list;
Press ▼/▲ button to select the input
source you
want to watch;
Press ENTER button to enter
the input
source;
>
50
50
50
0
50
>
MENU Exil
◀/▶
to adjust the value in
16