Sharp AY-ZP35PR Service Manual page 55

AY-ZP35PR
CONTROL BOX
1.Control unit box's Approach to decomposition.
1) Cut the band
2) Take off lead wires from terminal assembly.
(Blue wire,Brown wire,Red wire,Green/Yellow wire)
3) Take off screw (earth).
Take off earth lead wire (green/yellow) from terminal holder.
4) Take off box cover.
BAND
5) Take off heat sink holder.
6) Take off screws (8 PCS)
SCREW
5 – 8
BOX COVER
HEAT SINK HOLDER