Toshiba Strata DK Interface Manual page 16

LinkPlus Interface Guide: Toshiba Strata DK/CTX System
16
• Use Program 41 to restrict outgoing calls on this handset, if
desired.
• Use Program 48 to assign a class of restriction to the handset.
Use Program 58-5 to assign one or more of the handsets to receive
•
overflow CO line calls from the Attendant Console, if desired.
Keystrip type and flexible buttons
Program the handset's flexible buttons according to the pre-
installation planning. In most cases, the buttons will emulate the
programming on the user's desk set.
Use Program 38 to assign Code 33(20-button keystrip type C) to the
handset.
After assigning the default keystrip, use Program 39 to program the
handset's individual buttons as desired.
• Assign one button to Speed Dial Select. Keystrip 33 (Type C)
should have assigned this, but if it is not assigned the ∗ key will
not work.
• If messaging is used at your site, assign a button to LCD Message
to allow users to scroll messages.
For example, when you assign LCD Message to Button 10 in place of
Speed Dial Button 10, the handset user will access LCD messages by
pressing FCN then 4, the key sequence that maps to Button 10.
PN: 1725-36145-001_D.doc