Rear Sockets Access - Cisco Telepresence System EX60 User Manual

Cisco Telepresence System EX60
Contents Introduction
Connecting the EX60
Connect the cables as shown. Sockets are located behind the rear cover. If you
have one LAN connection only—and need that for your PC—the EX60 has a built in
Gigabit ethernet switch that enables you to connect your PC to the EX60 to access
the LAN through the EX60.

Rear sockets access

Remove cover to get access to the connector sockets.
D14779.05 User guide EX60, TC5.0, November 2011.
All contents are Copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Connecting EX60 Connecting EX60 Using EX60
Bend gently
upwards where
the arrows
indicate and then
pull out the lid.
Sockets
Connect headphones
and external
microphone here.
Scheduled meetings
The EX60 parts
Camera with built-in privacy shutter.
The Cisco
Telepresence Touch
controller
Connecting
  

Connect power here.

Connect your PC here if you need to share a single LAN connection with the
EX60.

Connect your EX60 to the LAN.

Connect the touch screen controller.

DVI socket to use the EX60 as a PC screen.

Mini-jack socket for PC audio.

For service and maintenance.
6
The Settings Contact us
   
www.cisco.com
User guide