Hand Held Products Dolphin 9500 Quick Start Manual page 12

• Press the stylus firmly into the center of the cross-hair target once and
release. Do not "double-tap" the target.
• You can re-align the screen at any time by going to Start > Settings >
System tab > Screen.
5. Complete the series of screens that teach you how to use the stylus and
popup menus.
6. Setup is complete. Wait as your terminal begins auto-installing programs.
7. When Autoinstall is complete, the system performs a soft reset that ends on
the Today screen.
Autoinstall
Autoinstall occurs after each hard reset. For each program that loads, a status
bar indicates that the program is loading. Do NOT touch the keyboard or the
screen while programs are loading.
All configurations of the Dolphin 9500 Series install Demos and Utilities. If the
terminal is configured with a wireless radio, the appropriate radio drivers and
utilities for each radio install.
After Autoinstall is complete, the terminal performs a soft reset automatically.
When it finishes booting up after the soft reset, the Today screen appears - see
page 9.
8 Dolphin® 9500 Series Mobile Computers Quick Start Guide