Search Function - JVC BR-DV6000 Instructions Manual

PLAYBACK
Index search
This function searches to the position where the index signal is recorded.
MENU DISP RESET
Mini
PROFESSIONAL
SEARCH– SET SEARCH+
MIC
HOLD BLANK CUE UP
PHONES REC LEVEL
BR-DV6000
CH-1/3 CH-2/4
SEARCH–
SEARCH+
button button
Monitor screen
INDEX+1
Index search progressing:
displayed on the screen
(The number denotes the
corresponding index position.)
Blank search
This function searches unrecorded parts of the tape.
MENU RESET
DISP
Mini
SEARCH–
SET SEARCH+
MIC
HOLD BLANK CUE UP
PHONES REC LEVEL
BR-DV6000
CH-1/3 CH-2/4
BLANK button
Monitor screen
BLANK SEARCH
52
:Setting:
Set ";, :" KEY FUNC in the SYSTEM (1/2) Menu screen to IN-
DEX.
:Operation:
To search an index point in the forward direction from
the current tape position:
• Press the SEARCH + button.
The index position to be searched can be specified by the number
of times this button is pressed. (Max: 99)
To search an index point in the reverse direction from
the current tape position:
• Press the SEARCH – button.
The index position to be searched can be specified by the number
of times this button is pressed. (Max: 99)
When the SEARCH + or SEARCH – button is pressed,
the unit fast-forwards or rewinds to the specified in-
dexed position and start playing.
Memo
● If the interval between index signals is less than one minute, the
function may not work well.
● The specifications for index signal recording varies with the device
used.
In the STOP mode, press the BLANK button.
¥ • If the current position is at a recorded part of the tape, BR-
PROFESSIONAL
DV6000 fast-forwards until an unrecorded part is reached
and stops there.
• If the current position is an unrecorded part of the tape, BR-
DV6000 will first advance the tape in the forward direction
for confirmation and thereafter rewind and go into the STILL
mode at the last recorded position.
• During a blank search, "BLANK SEARCH" is displayed on
the monitor.
– Search function –