JVC BR-DV6000 Instructions Manual page 25

Display
The user attempted to perform audio dubbing on a tape that is not ready for
A. DUB INHIBIT
(REC TAB) recording (the rear switch is set to SAVE).
A. DUB INHIBIT This message is displayed when audio dubbing is attempted under the following
(48 K) conditions.
• AUDIO MODE of the AUDIO Menu screen is set to 48 K.
• The tape is recorded with a sampling frequency of 48kHz
A. DUB INHIBIT The user attempted to perform audio dubbing on a tape recorded in the LP
(LP) mode.
A. DUB INHIBIT The user attempted to perform audio dubbing of a blank tape.
(BLANK)
The user attempted to perform audio dubbing during DV signal input (with the
A. DUB INHIBIT
INPUT SELECT switch set to "DV").
(DV)
The user attempted audio dubbing when PB/DV IN in the SYSTEM (2/2) Menu
A. DUB INHIBIT
(NTSC/PAL) screen is set to PAL.
A. DUB INHIBIT The user attempted to perform audio dubbing on a DVCAM format tape.
(DVCAM)
EDIT INHIBIT The user attempted to edit a tape that cannot be recorded (with the rear switch
(REC TAB) set to "SAVE").
EDIT INHIBIT The user attempted to edit a tape recorded in the LP mode.
(LP)
The user attempted to insert-edit an unrecorded part of a tape.
EDIT INHIBIT
(BLANK)
The user attempted editing when PB/DV IN in the SYSTEM (2/2) Menu screen is
EDIT INHIBIT
(NTSC/PAL) set to PAL.
EDIT INHIBIT The user attempted to edit a tape recorded in the DVCAM format.
(DV CAM)
EDIT INHIBIT The user attempted editing in an audio combination that cannot be edited.
(AUDIO)
EDIT INHIBIT The user attempted time-code insert-editing during DV signal input.
(DV TC INS)
DV EE INHIBIT This message is displayed when the REC button is pressed during playback
with the INPUT SELECT switch set to DV.
(EE check is not allowed during DV input.)
This message is displayed when an operation button is pressed with OPERA-
OPERATION
TION LOCK enabled. To enable OPERATION LOCK, set OPERATION LOCK in
LOCK
the SYSTEM (2/2) Menu screen to ON.
Description
25