When You Have Trouble; Troubleshooting - JVC LT-26DR7BJ Service Manual

Lcd integrated digital television
Hide thumbs Also See for LT-26DR7BJ:
Table of Contents

Advertisement

When you
have trouble

Troubleshooting

Severe noise or
snow
 Is the TV connected correctly to
the aerial?
 Change the direction of the aerial.
 Is the aerial or its cable
damaged?
Consult your retailer
Patterns, stripes
or noise
 Is the aerial receiving interference
from high-voltage power lines or
wireless transmitters?
Consult your retailer
 Are connected devices too close
to the TV?
Insert the minimum distance
between the aerial and the
cause of interference until no
interference
Ghosting
(Doubling of images)
 Are you receiving interference
from signals reflected off
mountains or buildings?
Adjust the direction of your
aerial, or change to a
good-quality directional aerial
44
I can't turn it on!
 Is the power cord connected to the AC outlet
correctly?
The remote
control doesn't
work!
 Are the batteries flat?
 Are you more than 7 meters away
from the TV?
 Is the "MODE (TV, VDR/DVR, DVD, HC)" set to "TV"?
When viewing teletext, the TV menu bar does not appear.
Depending on the stability of the signal, there may be a time
lag when changing channels.
Problem
Is the ATV reception poor, too?
Following the instructions in "Severe noise or snow"
can solve this problem.
Is there a DTV transmission tower nearby?
Not displayed
Turn "Attenuator" to "On", since the radio waves
(black screen)
are too strong.
There may be problems at the antenna, radio waves,
or the area you live in, where reception is bad.
Consult your retailer.
Remote control
Unplug TV, several minutes later plug it in again.
stops working
Hold down "
DTV screen is frozen
simultaneously to restart.
Some functions
It is not a malfunction. Some functions (dark background)
do not work
in the menu do not work depending on the situation.
Aspect ratio changes
Press "
" to return to your settings.
unintentionally
PC screen alignment
Adjust the "PC Position".
is off
Unnatural colour >>> Adjust "Colour" and "Bright-1".
Noise >>> Set to the following functions.
Picture Mode :
Poor picture quality
Super DigiPure : Max
Dull picture >>> Set to the following functions.
Picture Mode :
Super DigiPure : Min
If you connected S-Video output device, check the "S-IN" setting.
If the top of the image is distorted, check the video signal
Strange picture
quality itself.
when using an external
If movement appears unnatural when receiving a signal
device
from a DVD player, etc. with 625p (progressive-scanning),
change the output setting of the external device to 625i
(interlace-scanning).
Adjust the "Bass" and "Treble".
Poor sound
If receiving a poor signal in "Stereo / t·u", switch to "Mono".
No sound from the
Audio signals received from EXT-5 cannot be sent to the
audio component
"AUDIO OUT" terminal.
Actions
page
44
35
" and "
" on the TV
20
26
35
42
Check your "Colour System".
35
Standard
42
34
Bright
42
27
35
35
45

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents