JVC KV-C1 Instructions Manual page 14

14
Selecting a Channel (continued)
For automatic storage channel selection
(used to view channels in the order in which they are stored in memory)
Operations on the display unit
[CH MODE]
AUTO MANUAL
MENU
[CH MODE]
AUTO MANUAL
[AUTO SEARCH]
40CH
2 3 4 6
10 12
Shows the channel numbers
stored in memory
Channels stored in memory
are seen in order
Changes in the Changes in the
direction of
direction of
smaller channel larger channel
numbers numbers
POWER POWER
Press the MENU button 3 times quickly and select the CH
MODE.
Select AUTO.
After the CH MODE display disappears, press the [ ] or
[ ] button for 2 seconds or longer.
8
When automatic storage is finished, press the [ ] or [ ]
button for less than 2 seconds and select the channel you
would like to watch.
Note
• What is automatic storage (Auto Store)?
This function automatically picks up the broadcast waves which can be re-
ceived in the region where the tuner system is being used and stores them
in memory. A memory of channels can be easily added when out on a drive
or other location. When the automatic storage function is used, the chan-
nels previously stored in the memory are lost.
• When automatic storage is finished:
The system returns to the channel being used prior to the automatic stor-
age operation.
• When you are in a region where the electric waves are weak
It may not be possible to store channels in memory.
MODE MODE MENU MENU