Pioneer YN018-2 User Manual page 7

OPERATING INSTRUCTIONS
Identification of parts
FloorConsolte Type
Indoor unit
1
2
One-five
1
3
One-four
One-three
One-twin
10
Display panel
Infrared signal receiver
3
1
2
4
Indoor unit
1. Air flow louver (at air outlet)
4
2. Air inlet(with air filter in it)
5
3. Remote controller
4. Installation part
6 5. Display panel
6. Connecting pipe
Outdoor unit
7. Drain hose, refrigerant connecting pipe
8. Connective cable
9. Stop valve
10. Fan hood
DISPLAY PANEL:
OPERATION indication lamp
This indicator illuminates when the unit is
operational.
TIMER indication lamp
Lights up during Timer operation.
DEFROST indication lamp
models only)
(Cooling only type)
Lights up when the air conditioner starts
defrosting automatically in heating operation
or fan only mode is selected.
Temporary button
This button is used to operate the unit
temporarily in case you misplace the remote
controller or its batteries are exhausted. One
press of the manual control button will lead to
the forced AUTO operation. If press the button
twice within five seconds, the unit will operate
under forced COOL operation. The forced
COOL operation is used for testing purposes
only, please do not choose it unless it is
7
necessary.
8
9
12
or Fan only indication lamp
:
(Cooling & Heating