Advertisement
Thank you for purchasing the KA-F5604U Analog output card.
Mounting this card to KY-F560 Camera
KY-F560
Slot cover
KY-F560
Slot
Analog output
terminal
By inserting this card into JVC's color video camera
KY-F560, either composite video signal, component
video signal(Y/Cb/Cr), RGB signal or Y/C signal is
output.
Analog output
terminal
KY-F560 power must be switched off before mounting
the card.
1.
Remove two screws Å from the rear of the camera and
take out the slot cover.
Screw Å
2.
Insert this Analog output card into the slot at the rear of
This card
the camera and secure it by screwing back the two
screws Å which were taken out earlier in the above
mentioned step
Screw Å
1
. .
Notes
Ensure that the Analog output card is inserted
all the way in.
5
Advertisement
