Dividing A Scene (Avchd) - Panasonic HC-V130 Operating Instructions Manual

Dividing a scene (AVCHD)

It is possible to divide an AVCHD scene. Any unwanted parts in the scene can be deleted after
dividing.
≥ Set the mode switch to
scene. (l 24)
1
Select the menu.
: [EDIT SCENE] # [DIVIDE] # [SET]
2
Select the scene you wish to divide using the cursor button and press the
ENTER button.
3
Select to set the dividing point.
≥ It is convenient to use Slow-motion Playback and
Frame-by-frame Playback.
≥ Select [YES] to continue dividing the same scene. To
continue dividing other scenes, select [NO] and repeat
Steps 2-3.
4
Press the MENU button to complete dividing.
≥ Unwanted parts can be deleted.
To delete all the divided points
: [EDIT SCENE] # [DIVIDE] # [CANCEL ALL]
≥ The scenes that were deleted after division cannot be recovered.
≥ You cannot divide a scene if the number of scenes of a given date would exceed 99 scenes.
≥ It may not be possible to divide scenes with a short recording time.
≥ Data that has been recorded or edited on another device cannot be divided and the divided points
cannot be deleted.
, select the play mode selection icon, and select the AVCHD
(l 51)
(l 56)
- 58 -
0h00m15s 0h00m15s 0h00m15s