Face Framing; Wind Cut - Panasonic HC-V130 Operating Instructions Manual

[FACE FRAMING]

Detected faces appear with frames.
: [RECORD SETUP] # [FACE FRAMING] # desired setting
[PRIMARY]:
Only the prioritised face framing is displayed.
[ALL]:
All face detection framings are displayed.
[OFF]:
Cancel the setting.
≥ Up to 15 frames are indicated. Larger faces and faces nearer to the centre of the screen take
preference over others.
∫ Prioritised face framing
Prioritised face framing is displayed as orange frames. Focus and adjustment of brightness will be
performed against the prioritised face framing.
≥ The prioritised face frame is displayed only with Portrait Mode in the Intelligent Auto Mode.
≥ The white frame is for face detection only.
[AUTO SLOW SHTR]
You can record bright pictures even in dark places by slowing the shutter speed.
≥ Switch to Manual Mode.
: [RECORD SETUP] # [AUTO SLOW SHTR] # [ON]
≥ The shutter speed is set to 1/25 or more depending on the surrounding brightness.
≥ When the shutter speed becomes 1/25, the screen may be seen as if frames are missed and
afterimages may appear.

[WIND CUT]

This is for reducing the wind noise coming into the built-in microphones.
≥ Switch to Manual Mode.
: [RECORD SETUP] # [WIND CUT] # [ON]
≥ This function's default setting is [ON].
≥ When switching to Intelligent Auto Mode, [WIND CUT] is set to [ON], and the setting cannot be
changed.
≥ You may not see the full effect depending on the recording conditions.
(l 47)
(l 47)
- 45 -