Demo Mode - Panasonic HC-V130 Operating Instructions Manual

[DEMO MODE]

This item is used to start the unit demonstration.
(Only when the mode is at the
: [SETUP] # [DEMO MODE] # [ON]
≥ If [DEMO MODE] is switched to [ON] and you press the MENU button when there is no SD card
inserted and while this unit is connected to the AC adaptor, the demonstration automatically
starts.
If any operation takes place, the demonstration is cancelled. However if no operations take place
for approx. 10 minutes, the demonstration automatically starts again. To stop the demonstration,
set [DEMO MODE] to [OFF] or insert an SD card.
[Eye-Fi TRANSFER]
This item is displayed only when an Eye-Fi card is inserted.
Please refer to page 70.
[Eye-Fi DIRECT]
This item is displayed only when an Eye-Fi card is inserted.
Please refer to page 71.
[LANGUAGE]
You can select the language on the screen display and the menu screen.
: [SETUP] # [LANGUAGE] # desired setting
position)
- 34 -