Download Print this page

HP 9200c Digital Sender Service Manual: Scanner Lamp; Figure 6-103 Removing The Lamp

Digital sender.
Hide thumbs

Advertisement

Scanner lamp

1
Remove the following assemblies.
ADF assembly. See
Scanner glass and cover. See
2
Remove two grounding screws and wires (callout 1), disconnect one connector (callout 2), and
remove one screw (callout 3).
3
Figure 6-103
3
For better access to the lamp, release the optical assembly by loosening the tension screw,
disengaging the belt, and flexing the side of the unit to release the rod.
4
Unwrap the lamp wires from the plastic wire guide.
5
Grasp the scanner lamp, and carefully slide it out of the optical unit (towards the cable end).
Internal components
ADF assembly or scanner
Scanner glass and
2
Removing the lamp
assembly.
cover.
1
145

Advertisement

Troubleshooting

   Related Manuals for HP 9200c Digital Sender

Comments to this Manuals

Symbols: 0
Latest comments: