Throttle Body Assy
Install the air duct clamp bolts in the direction as shown.
Bolt Heads [A]
Fit the projections [B] of the holder into the holes in the
Install the air ducts to the throttle body assy.
Apply a small amount of 2-stroke oil to the throttle body
assy holder for easy installation.
Torque - Air Duct Clamp Bolts: 2.0 N·m (0.20 kgf·m, 18 in·lb)
Apply a thin coating of grease to the throttle cable upper
Install the upper ends of the throttle cables in the grip.
Fit the projection [A] of the right switch housing into the
hole [B] of the handlebar.
Turn the throttle grip and make sure that the throttle valves
move smoothly and return by spring force.
Run the leads and hoses correctly (see Cable, Wire, and
Hose Routing section in the Appendix chapter).
Throttle Grip Free Play (see Throttle Control System In-
spection in the Periodic Maintenance chapter)
Idle Speed (see Idle Speed Adjustment in the Periodic
Throttle Body Assy Disassembly
1. Subthrottle Valve Actuator
2. Subthrottle Sensor
3. Main Throttle Sensor
4. Throttle Body Assy
5. Fuel Injectors
6. Delivery Pipe Assy
7. Subthrottle Valve Actuator Connector Harness
Air Cleaner Housing Mounting Bolts: 9.8 N·m (1.0
kgf·m, 87 in·lb)
manuals search engine
FUEL SYSTEM (DFI) 3-129