Service Mode Table; Service Mode Items; Service Chart Print 1 - Canon LBP5050 Series Service Manual

Lbp5050 series
Hide thumbs Also See for LBP5050 Series:
Table of Contents

Advertisement

5.5.2 Service Mode Table

5.5.2.1 Service Mode Items

LBP5050N / LBP5050
Group
Service Chart Print
Counter Details
Service Settings
Primary transfer
bias
Secondary
transfer bias
Developing bias Use this to specify the offset value for developing bias.
ICL bias
Fixing
temperature
Configuration Page Print B
Log Retention Settings
F-5-6
F-5-7
T-5-7
Description
Print of Service Chart Print 1
Print of Service Chart Print 2
Use it to check the number of printed pages using respective toner cartridges.
Use this to specify the offset value for primary transfer bias.
-Decreasing the setting value: Effective for images with negative ghost image
(reverse of the previous image).
Use this to specify the offset value for secondary transfer bias.
- Increasing the setting value: Effective for images with toner spatter/water droplets.
- Decreasing the setting value: Effective for images with white marks, white
blotches, rough-textured half-tones.
- Increasing the setting value: Effective for images with foggy image.
- Decreasing the setting value: Effective for images with light density.
Use this to specify the offset value for ITB cleaning bias.
Cleaning trouble is alleviated when the setting is increased.
Use this to set the fixing temperature.
sets the offset value of the fixing temperature control for improvement of fixing.
Print of configuration page print B
Output of Log file
[2]
Chapter 5
Settings
-5 to +5(0*)
front side: -5 to +5(0*)
back side: -5 to +5(0*)
-5 to +5(0*)
-5 to +5(0*)
-2 to +2(0*)
0019-0669
5-7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lbp5050nLbp5050

Table of Contents