General; Location Of Controls; Card Remote Commander - Sony CDX-GT41UW Service Manual

• LOCATION OF CONTROLS

• CDX-GT41UW/GT410U
Location of controls and basic operations
Main unit
1 2 3 4
OFF
PUSH SELECT
EQ3 SOURCE
SEEK SEEK
CAT
BTM MODE
DIM GP/ALBM
DSPL 1
9 q; qa qs qd qfqg

Card remote commander

RM-X151
wa
1
OFF ATT
ws
4
SOURCE SEL MODE
qd
ql
+
wd
–
qf qj
DSPL SCRL
1 2 3
wf
4 5 6
+
w;
VOL
–
6
• CDX-GT460U/GT460US
Location of controls and basic operations
Main unit
1 2 3 4
OFF
PUSH SELECT
EQ3 SOURCE
SEEK SEEK
CAT
BTM MODE
DIM GP/ALBM
DSPL 1
9 q; qa qs qd qfqg qh
Card remote commander
RM-X151
ws
1
OFF ATT
wd
4
SOURCE SEL MODE
qd
w;
+
wf
–
qk
qf
DSPL SCRL
1 2 3
wg
4 5 6
+
wa
VOL
–
6
SECTION 1
5 6 7 8
REP SHUF PAUSE
2 3 4 5 6 SCRL AUX
CDX-GT410U
qh qj qk CDX-GT41UW
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
A OFF button
To power off; stop the source.
B EQ3 (equalizer) button 10
To select an equalizer type (XPLOD,
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
C Volume control dial/select button 10
To adjust volume (rotate); select setup items
(press and rotate).
D SOURCE button
To power on; change the source (Radio/CD/
MD* 1 /USB/AUX/SAT* 2 ).
E Disc slot
Insert the disc (label side up), playback
starts.
F Display window
G USB terminal 9
To connect to the USB device.
H Z (eject) button
To eject the disc.
I BTM/CAT*
2 button 8
To start the BTM function (press and hold).
J
(front panel release) button 5
5 6 7 8
REP SHUF PAUSE
AUX
2 3 4 5 6 SCRL
CDX-GT460US
CDX-GT460U
qj qk ql
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
A OFF button
To power off; stop the source.
B EQ3 (equalizer) button 10
To select an equalizer type (XPLOD,
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
C Volume control dial/select button 10
To adjust volume (rotate); select setup items
(press and rotate).
D SOURCE button
To power on; change the source (Radio/CD/
MD* 1 /USB/AUX).
E Disc slot
Insert the disc (label side up), playback
starts.
F Display window
G USB terminal
To connect to the USB device. 9
H Z (eject) button
To eject the disc.
I BTM button 8
To start the BTM function (press and hold).
J
(front panel release) button 5
CDX-GT41UW/GT410U/GT460U/GT460US

GENERAL

K SEEK –/+ buttons
CD/MD* 1 /USB* 3 :
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
L Receptor for the card remote
commander
M MODE button 8, 10, 12
To select the radio band (FM/AM); select the
SAT tuner band (mode)*
select the play mode*
N DSPL (display)/DIM (dimmer) button
8, 9
To change display items (press); change the
display brightness (press and hold).
O RESET button (located behind the front
panel) 4
P Number buttons
CD/MD* 1 /USB* 3 :
(1)/(2): GP* 6 /ALBM*
To skip albums (press); skip albums
continuously (press and hold)*
(3): REP 8, 10
(4): SHUF 8, 10
(6): PAUSE* 9
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
Q SCRL (scroll) button 8, 9
To scroll the display item.
R AUX input jack 11
To connect a portable audio device.
K SEEK –/+ buttons
CD/MD* 1 /USB* 2 :
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
L Receptor for the card remote
commander
M MODE button 8, 12
To select the radio band (FM/AM); select the
unit* 3 ; select the play mode*
N DSPL (display)/DIM (dimmer) button
8
To change display items (press); change the
display brightness (press and hold).
O RESET button (located behind the front
panel) 4
P Frequency select switch (located on the
bottom of the unit)
See "Frequency select switch" in the
supplied installation/connections manual.
Q Number buttons
CD/MD* 1 /USB* 2 :
(1)/(2): GP* 5 /ALBM*
To skip albums (press); skip albums
continuously (press and hold)*
(3): REP 8
(4): SHUF 8
(6): PAUSE* 8
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
R SCRL (scroll) button 8
To scroll the display item.
S AUX input jack 12
To connect a portable audio device.
This section is extracted
from instruction manual.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
ql < (.)/, (>) buttons
To control CD/radio/MD/USB, the same as
(SEEK) –/+ on the unit.
w; VOL (volume) +/– button
To adjust volume.
wa ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
ws SEL (select) button
2 ; select the unit* 4 ;
5
. The same as the select button on the unit.
wd M (+)/m (–) buttons
To control CD, the same as (1)/(2) (GP/
ALBM –/+) on the unit.
wf Number buttons
To receive stored stations (press); store
stations (press and hold).
*1 When an MD changer is connected.
*2 When the SAT tuner is connected.
*3 When a USB device is connected.
7 –/+
*4 When a CD/MD changer is connected.
*5 When an ATRAC Audio Device is connected.
8 .
*6 When an ATRAC CD is played.
*7 When an MP3/WMA/AAC is played.
*8 If the changer/USB device is connected, the
operation is different, see page 12.
*9 When playing back on this unit.
Notes
• When ejecting/inserting a disc, keep any USB
devices disconnected to avoid damage to the disc.
• If the unit is turned off and the display disappears, it
cannot be operated with the card remote
commander unless (SOURCE) on the unit is
pressed, or a disc is inserted to activate the unit first.
Tip
For details on how to replace the battery, see
"Replacing the lithium battery of the card remote
commander" on page 15.
About USB cap
When not using the USB terminal ( G ), use the
supplied USB cap to prevent dust or dirt entering.
Keep the USB cap out of the reach of children to
prevent accidental swallowing.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
w; < (.)/, (>) buttons
To control CD/radio/MD/USB, the same as
(SEEK) –/+ on the unit.
wa VOL (volume) +/– button
To adjust volume.
ws ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
wd SEL (select) button
4 .
The same as the select button on the unit.
wf M (+)/m (–) buttons
To control CD, the same as (1)/(2) (GP/
ALBM –/+) on the unit.
wg Number buttons
To receive stored stations (press); store
stations (press and hold).
*1 When an MD changer is connected.
*2 When a USB device is connected.
*3 When a CD/MD changer is connected.
*4 When an ATRAC Audio Device is connected.
*5 When an ATRAC CD is played.
*6 When an MP3/WMA/AAC is played.
*7 If the changer/USB device is connected, the
6 –/+
operation is different, see page 12.
*8 When playing back on this unit.
7
.
Notes
• When ejecting/inserting a disc, keep any USB
devices disconnected to avoid damage to the disc.
• If the unit is turned off and the display disappears, it
cannot be operated with the card remote
commander unless (SOURCE) on the unit is
pressed, or a disc is inserted to activate the unit first.
Tip
For details on how to replace the battery, see
"Replacing the lithium battery of the card remote
commander" on page 15.
About USB cap
When not using the USB terminal ( G ), use the
supplied USB cap to prevent dust or dirt entering.
Keep the USB cap out of the reach of children to
prevent accidental swallowing.
7
7
5