Replacing The License Plate Light Bulb - Yamaha MT-07 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
1. Turn signal light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
6
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
Replacing the license plate
1
light bulb
1. Remove the license plate light unit
by removing the nuts, washers
and collars, and then remove the
license plate light bulb socket (to-
gether with the bulb) by pulling it
out.
4
[ECA11192]
1. License plate light unit
2. Collar
3. Washer
4. Nut
5. License plate light bulb socket
2. Remove the burnt-out bulb by
pulling it out.
4
3
2
5
3
2
6-35
EAU59890
1. License plate light bulb
3. Insert a new bulb into the socket.
4. Install the socket (together with
1
the bulb) by pushing it in, and then
install the license plate light unit by
installing the collars, washers and
nuts.
1