Changing The Brake Fluid; Drive Chain Slack - Yamaha MT-07 Owner's Manual

Mt-07; mt-07a yamaha
Hide thumbs Also See for MT-07:
Table of Contents

Advertisement

fluid level goes down suddenly, have a
Yamaha dealer check the cause before
further riding.
PERIODIC MAINTENANCE AND ADJUSTMENT

Changing the brake fluid

Have a Yamaha dealer change the
brake fluid at the intervals specified in
the periodic maintenance and lubrica-
tion chart. In addition, have the oil seals
of the master cylinders and calipers as
well as the brake hoses replaced at the
intervals listed below or whenever they
are damaged or leaking.
 Oil seals: Replace every two
years.
 Brake hoses: Replace every four
years.
6-22
EAU22733

Drive chain slack

The drive chain slack should be
checked before each ride and adjusted
if necessary.
To check the drive chain slack
1. Place the motorcycle on the side-
stand.
TIP
When checking and adjusting the drive
chain slack, there should be no weight
on the motorcycle.
2. Shift the transmission into the
neutral position.
3. Push down on the drive chain un-
der the end of the drive chain
guide with a force of 15 N (1.5 kgf,
3.0 lbf).
4. Measure the drive chain slack be-
tween the drive chain guide and
the center of the chain as shown.
Drive chain slack:
51.0–56.0 mm (2.01–2.20 in)
EAU22762
EAU60040
6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mt-07aFz-07

Table of Contents