Yamaha MT-07 Owner's Manual page 62

Mt-07; mt-07a yamaha
Hide thumbs Also See for MT-07:
Table of Contents

Advertisement

PERIODIC MAINTENANCE AND ADJUSTMENT
1
3
1. Coolant reservoir cover
2. Bolt
3. Quick fastener
6
5. Remove the coolant reservoir cap.
1
2
1. Coolant reservoir cap
2. Coolant reservoir
6. Drain the coolant from the coolant
reservoir by turning it upside
down.
7. Install the coolant reservoir and its
cover by placing them in the origi-
2
nal position, and then installing the
bolt and quick fastener.
8. Remove the coolant drain bolt and
its gasket to drain the cooling sys-
tem.
1. Coolant drain bolt
2. Gasket
9. After the coolant is completely
10. Install the coolant drain bolt and
11. Pour the specified amount of the
2
1
12. Install the coolant reservoir cap.
13. Install the radiator cap.
6-13
drained, thoroughly flush the cool-
ing system with clean tap water.
its new gasket, and then tighten
the bolt to the specified torque.
Tightening torque:
Coolant drain bolt:
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
recommended coolant into the ra-
diator and reservoir.
Antifreeze/water mixture ratio:
1:1
Recommended antifreeze:
High-quality ethylene glycol anti-
freeze containing corrosion inhibi-
tors for aluminum engines
Coolant quantity:
Radiator capacity (including all
routes):
1.60 L (1.69 US qt, 1.41 Imp.qt)
Coolant reservoir capacity (up to
the maximum level mark):
0.25 L (0.26 US qt, 0.22 Imp.qt)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mt-07aFz-07

Table of Contents