Kenwood KVT-719DVD Service Manual page 33

Monitor with dvd receiver
Hide thumbs Also See for KVT-719DVD:
Table of Contents

Advertisement

2-3. Specifi cation of screens
This section describes the test mode functions available in
each screen.
2-3-1. Test Mode Main screen
This section describes the keys for transferring to each
screen from Test Mode Main screen.
The variety of screens displayed on Test Mode Main screen
is shown in Figure 2-3-1.
Test Mode Main
Information
Service
Source
Set Up
Auto Adjust
Figure 2-3-1 Test Mode Main screen
[Key specifi cation]
Information: Move on to Information screen.
Service: Move on to Service screen.
Source: Move on to Source Direct screen.
Set Up: Move on to Set Up Menu screen.
Audio: Move on to Audio Control Menu screen.
Touch: Move on to Touch Adjust screen.
HPOSI: Move on to HPOSI Adjust screen.
Auto Adjust: Move on to Auto Adjust Menu screen.
iPod: Move on to iPod Authentication Confi rmation screen.
Inverter: Move on to Inverter Confi rmation screen.
Tilt MECHA: Move on to Tilt MECHA Position Adjustment
screen. Only in "DDX" and "DNX" series
ExtSw Test: Ext-Sw waveform output (Output is "400ms
ON/OFF" using operations, SW1→SW2→SW3→SW4.)
Operation SW3/4 for "MID KOS".
2-3-2. Information screen
This screen shows such data as Serial No., Version
information of each µ-com, Region code, Status, etc.
The contents displayed on the Information screen are shown
in Figure 2-3-2.
TEST MODE
Audio
iPod
Touch
Inverter
HPOSI
Tilt MECHA
EXT SW TEST
KVT-719DVD/729DVD
/729DVDY/739DVD
DC Offset : None
Serial : ∗∗∗∗∗∗∗∗
: Redboot 12:00:00 Sep 15 2006
Media Processor
Kernel Sep 15 12:00:00 JST 2006
RootFS 060915_12:00
Low KVT System µCom
: V∗.∗∗∗ ROM : R– – – – Type∗
Mid DDX Audio µCom
: V∗.∗∗∗ ROM : R– – – – Type∗ Span∗
Monitor µCom
: V∗.∗∗∗ ROM : R– – – –
B/E : V∗.∗∗
F/E : V∗.∗∗
macrovision : V∗.∗∗
TV Tuner Box
: V∗.∗∗∗ ROM : R– – –
Figure 2-3-2 Information screen
• Monitor µCom information is shown only when the "KOS
Monitor" is connected.
• B/E, F/E, Region, and macrovision information are shown
only for the "KVT/DDX/DNX" series.
• TV Tuner Box is shown only when the "TV" is connected
("V500" is "V- - - -").
• Version information of the "OSD-ROM" is shown at the left
of the OSD display of the iPod image.
• Display shown before System/Audio is Model: Mid/Low
and Type: KVT/DDX/DNX/KOS.
[Key specifi cation]
Return: Move on to Test Mode Main screen.
2-3-3. Service screen
This screen is used to display or clear service information.
Chroma data in the E2PROM is cleared. DC Offset detection
information is displayed or cleared.
The contents displayed on the Service screen are shown in
Figure 2-3-3.
Init
Power On
Monitor Open
Init
Init
Monitor Close ∗∗∗ times
■Start
DVD Service INFO
∗ ∗ ∗ ∗
DVD DivX
Tuner Mute Level
Registration Code Clear
Figure 2-3-3 Service screen
• "DVD Service INFO" and "DVD DivX Registration Code
Clear" are shown only for the "KVT/DDX/DNX" series.
Security : Off
Region : ∗
Type∗
Return
∗∗∗ minutes
Serial
∗∗∗ times
Chroma
Ready
Clear
DC Offset
None
Clear
Return
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kvt-29dvdyKvt-739dvdKvt-729dvdKvt-729dvdy

Table of Contents