Using Daily Timer - JVC FS-A52 Instructions Manual

2
Press 4 to select "ON," then press SET.
3
Select the source to record.
1) Press ¢ or 4 repeatedly to select the source.
• Each time you press the buttons, the source
changes as follows:
FROM AUX
2) Press SET.
• When you have selected "FROM FM" or
"FROM AM," select a preset number by pressing
¢ or 4 (for how to preset stations, see
page 15.)
• When you have selected "FROM AUX," the
external equipment also needs to have the timer
function.
3) Press SET again.
4
Select the reverse mode either
¢ or 4, then press SET.
• For reverse mode, see page 28.
5
Set the timer-on and timer-off time.
1) Press ¢ or 4 repeatedly to select the hour of
the timer-on time, then press SET.
The minute digit of timer-on time starts flashing on
the display.
»
Timer-on time
2) Press ¢ or 4 repeatedly to select the minute
of the timer-on time, then press SET.
The hour digit of timer-off time starts flashing on
the display.
3) Press ¢ or 4 repeatedly to select the hour of
the timer-off time, then press SET.
The minute digit of timer-off time starts flashing on
the display.
4) Press ¢ or 4 repeatedly to select the minute
of the timer-off time, then press SET.
• The setting you have done are shown on the
display in sequence.
• The REC indicator stops flashing and remains lit.
6
Press STANDBY/ON to turn off the unit (on
standby) if necessary.
• No sounds come out while timer recording is
performed.
FROM FM
FROM AM
or by pressing
»
Timer-off time
To turn off the Recording Timer after its setting is done,
1 Press CLOCK/TIMER repeatedly until "REC TIMER"
appears on the display.
2 Press ¢ to select "OFF," then press SET.
The timer ( ) and REC indicators go off from the
display.
To turn on the Recording Timer again, press 4 to
select "ON", then press SET.
The timer ( ) and REC indicators light on the display.
The settings you have done are shown on the display for
your confirmation.
If you stop recording during Recording Timer
The recording is canceled, but when the timer-off time comes, the
unit turns off.
When you unplug the AC power cord or if a power
failure occurs
The timer setting, the tuner preset stations and other settings will
be erased.

Using Daily Timer

With Daily Timer, you can wake up to your favorite music
or radio program.
• You can set Daily Timer whether the unit is turned on or
off (on standby.)
• To correct a misentry any time during the setting process,
press CANCEL.
How Daily Timer actually works
The unit automatically turns on, and starts playing the
specified source when the timer-on time comes. (While
Daily Timer is working, the DAILY indicator keeps
flashing.) Then, when the timer-off time comes, the unit
automatically turns off (on standby.)
Daily Timer works every day, and the timer settings remain
stored in memory unless you reset them or unplug the AC
power cord.
– 32 –
Continued