Selecting The Video Signal Type - JVC DD-1 Instructions Manual

Network medai system and digital media system

Hide thumbs Also See for DD-1:

Instructions manual (60 pages)

Instructions manual (64 pages)

Table Of Contents

Table of Contents

Preparation (continued)

NOTE

• DD-8 and DD-3 support up to HDMI version 1.0.

The HDMI video signal type can be checked with

the "HDMI" indicator in the display window.

(Refer to "Selecting the video signal type" shown

on the right.)

• If the picture is distorted while an HDMI TV is

connected, turn off the main unit and turn it on

again.

• A TV compatible with HDCP (High-Bandwidth

Digital Content Protection) can also be con-

nected to the [HDMI] terminal, so that the

uncompressed HD video signal type can be out-

put as well.

■ CAUTION

• Do not connect an S-video cable and a compo-

nent video cable at the same time. Otherwise

the picture may not be played back properly.

• Connect the main unit directly to a TV (or a mon-

itor) without routing through a video cassette

recorder (VCR). Otherwise picture distortion

may occur during playback. (Routing the con-

nection through a VCR, however, does not affect

the audio quality.)

Main unit

Direct connection

• Connecting the main unit to a VCR-built-in-TV

may also cause picture distortion during play-

back.

Do not turn on the power until you complete the connection.

(or monitor)

VCR