Download Print this page

Honeywell HHMC21 Installation Manual page 5

21-inch color monitor
Hide thumbs


Table of Contents
POWER CORDS -- Do not allow anything to rest on the power cord. Do not locate video
monitor or equipment where the cord will be abused by persons walking on it.
HEED WARNINGS -- Follow all instructions marked on the video monitor or equipment.
LIGHTNING -- For added protection for video monitor or equipment during a lightning storm,
or when it is left unattended and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will prevent damage to the video
product due to lightning and power-line surges.
OVERLOADING --Do not overload wall outlets and extension cords as this can result in a
risk of fire or electric shock.
OBJECT AND LIQUID ENTRY -- Never push objects of any kind into video monitor or
equipment through openings as they may touch dangerous voltage points or short-out parts
that could result in a fire or electric shock. Never spill liquid of any kind on the product.
SERVICING -- Do not attempt to service video monitor or equipment yourself as opening or
removing covers may expose you to dangerous voltage or other hazards. Refer all servicing
to qualified service personnel.
DAMAGE REQUIRING SERVICE -- Unplug video monitor or equipment from the wall outlet
and refer servicing to qualified service personnel under the following conditions:
A. When the power-supply cord or the plug has been damaged.
B. If liquid has spilled, or objects have fallen into the video product.
C. If the video product has been exposed to rain or water.
D. If the video product does not operate normally by following the operating instructions,
adjust only those controls that are covered by the operating instructions as an improper
adjustment of other controls may result in damage and will often require extensive work
by a qualified technician to restore the video product to its normal operation.
E. If the video product has been dropped, or the cabinet damaged.
F. When the video product exhibits a distinct change in performance -- this indicates a need
for service.
REPLACEMENT PARTS -- When replacement parts are required, be sure the service
technician has used replacement parts specified by the manufacturer or that have the same
characteristics as the original part. Unauthorized substitutions may result in fire, electric
shock or other hazards.
SAFETY CHECK -- Upon completion of any service or repairs to this video product, ask the
service technician to perform safety checks to determine that the video product is in proper
operating condition.
FIELD INSTALLATION -- This installation should be made by a qualified service person and
should conform to all local codes.


Table of Contents

  Related Manuals for Honeywell HHMC21