Download  Print this page

Appendix A : Troubleshooting - Honeywell HHMC21 Installation Manual

21-inch color monitor
Hide thumbs

Advertisement

Table of Contents
PROBLEM
No Video
Bad Video
Black Border
Poor video quality
Picture too bright
or too dark
Picture is off center
Menu in wrong
language
Fuzzy Video
APPENDIX A :
TROUBLESHOOTING
Check that all components in the system (monitor,
cameras, VCRs, multiplexers, etc.) have power and
are turned on.
Check that the camera lens cap is removed and the
lens is set to proper aperture.
Check cable(s) for proper connections and condition.
Connect a known good video source directly to the
monitor to make certain the monitor is not the
Problem.
If no video equipment is "looped through" the
monitor, make certain that a cable is NOT connected
to the loop-through connector.
Make certain the
Enter the Menu and adjust the
Brightness, Color
Check that the lens aperture is set correctly.
Enter the Menu and adjust the
Enter the Menu and adjust the
V-Position
as necessary.
Move the cursor to the bottom menu item using the
Up
or
Down
buttons. Then, scroll through the
language choices using the
If the camera has a manual focus lens, check that it
is properly focused.
If the camera has on autofocus lens, ensure that it is
working properly.
Check that the back focus ring on the camera has
been adjusted correctly.
Check that the lens housing window are clean.
14
POSSIBLE SOLUTION
Under Scan
LED is off.
Contrast,
and
Tint
settings.
Brightness
H-Position
Left
setting.
and
and
Right
buttons.

Advertisement

Table of Contents
loading

  Related Manuals for Honeywell HHMC21