Panasonic KX-TDE600 Programming Manual page 36

3.1.9 RTP/RTCP
RTP QoS Ability
Specifies the type of value to be stored in the ToS field in the IP header.
Default
ToS
Value Range
ToS, DSCP, HEX
RTP QoS-ToS Priority
Specifies the priority level in the ToS field.
Default
0
Value Range
0–7
RTP QoS-ToS Type
Specifies the ToS type in the ToS field.
Default
Normal
Value Range
Normal, Monetary Cost, Reliability, Throughput, Delay
RTP QoS-DSCP
Specifies the value in the ToS field by a DSCP for DiffServ.
Default
Not stored.
Value Range
0–63
RTP QoS-HEX
Specifies the value in the ToS field by a hexadecimal number.
Default
Not stored.
Value Range
00–FF
RTCP Packet Sending Ability
Specifies whether to enable each port to send RTCP packets.
36 Programming Manual for Virtual SIP CO Line Card Document Version 2008-11