Installation Preparation 8; Chart: Fm1, Fm2 And Am Pre-Set Stations - Toyota 2008 Tundra Navigation System Installation Manual

3. INSTALLATION PREPARATION
• Prior to installing the CAR-NAVI System kit, check the following for damage or
malfunction:
• Internal and external trim and body work.
• Following vehicle functions:
•
•
• CAR-NAVI system parts preparation:
• When unpacking the CAR-NAVI system kit, lay out all components in the
order of installation and check for missing or damaged parts.

CHART: FM1, FM2 AND AM PRE-SET STATIONS

1
FM1
FM2
AM
Radio (FM1, FM2, AM)
Automatic Climate Control System (i.e.: AUTO, A/C, TEMP, FAN
SPEED CONTROL, ALL VENT MODES, REAR DEFROST,
SECURITY, HAZARD LIGHTS, etc.).
2
NOTE
Before proceeding with the CAR-
NAVI kit installation, please remove
any audio CD(s) from the factory
radio assembly. Also, please
ensure that the pre-set radio
stations (FM1, FM2 and AM) are
written down to pre-set the AVN-S
display unit. Please use chart
below.
3 4 5 6
8