Tv Buttons And Functions - JVC InteriArt AV-2986ME Service Manual

TV buttons and functions

The illustrations shown below is for AV-2156BE and AV-2988SE only, which are used for explanation purpose.
Your TV may not look exactly the same as illustrated.
Front of the TV
AV-2988SE
POWER
TV/VIDEO
MENU/OK
CHANNEL
VOLUME
AV-2156BE
V L / MONO R
CHANNEL
IN (VIDEO-3) MENU
OK
Rear of the TV
AV-2988SE
6
POWER
VOLUME
No. Button/terminal Description
1 L (main power)
Press to turn on or turn off the TV's main power.
2 POWER lamp Indicate the TV's status.
No colour : TV's main power is being turned off.
Red
Blink
Note: When you turn off the power switch while TV is in standby mode,
the power lamp will go off in 10 -15 seconds.
When you operate the TV, POWER Lamp will be blink.
3 ECO sensor
4 Remote control sensor
5 TV/VIDEO Press to select TV or Video terminal input or exit from menu.
6 VOLUME -/+ Press to adjust the volume level.
7 CHANNEL -/+ Press to select the desired channel (Both of RF and Video input.)
8 MENU/OK Press to display the menu.
9 IN (VIDEO-3) Video and audio input jacks for VIDEO-3 mode.
! Headphone jack.
Aerial socket.
"
# OUTPUT Video and audio output jacks. (The component video
signal cannot be output.)
$ COMPONENT Video or component video, and audio input jacks for VIDEO-2
(VIDEO-2) INPUT mode. You can select the input signal by setting the "VIDEO-2
SETTING" function (see page 18).
% VIDEO-1 INPUT Video or S-VIDEO, and audio input jacks for VIDEO-1 mode.
How to operate the menus with the TV button
Work as same as the button on
TV button
the remote control unit
MENU MENU/OK button
∞/5 button
CHANNEL -/+
2/3 button
VOLUME -/+
: TV's main power is being turned on.
: While the TV is in standby mode, ON TIMER funciton is in used.
While the TV is in turn on mode , OFF TIMER function is in used.
Note
To display main menu and exit menu after
fi nish setting.
To select menu function.
To choose a Top menu and adjust the
desired menu function.
Page
–
–
–
–
–
–
–
–
22
22
7
22
22
7