Adjusting the Call Volume
During a call, to adjust the volume, use the Volume key on
the left side of the phone.
Press the Up end of the volume key to increase the
volume level and press the Down end of the volume
key to decrease the volume level.
– or –
Quickly add more volume to the incoming audio by
touching the on-screen Extra volume button
From a Home screen, you can also adjust the ringer volume
using these same keys.
During an active call there are several functions available by
touching a corresponding on-screen button.
Add call: Display the dialer so you can call another person.
Keypad: Display the on-screen keypad, where you can
enter number using DTMF (Dual Tone Multi-Frequency).
End call: Terminate the call.
Speaker: Route the phone's audio through either the speaker or
through the earpiece.
DRAFT - For Internal Use Only
Touch Speaker to route the audio through the speaker. (You
can adjust the speaker volume using the volume keys.) A green
line will appear under the Speaker button.
Touch Speaker again to use the phone's earpiece (see "Using
the Speakerphone During an Active Call" on page 70). The
green line will disappear when Speaker is not activated.
Mute/Unmute turn the onboard microphone either on or off.
Touch Mute during a call to mute the microphone. A green line
will appear under the Mute button.
Touch Mute again to unmute the microphone. The green line
will disappear when Mute is not activated.
Headset connects to a Bluetooth headset.
Touch Headset during a call to activate a Bluetooth headset. A
green line will appear under the Headset button.
Touch Headset again to de-activate the Bluetooth headset. The
green line will disappear when the Headset is not activated.
Contacts: Go to your Contact list.
Memo: Write a memo.
Message: Write a message during a call.
Menu for more options: