There are many different camera modes that you can use to
help optimize your photos depending on the conditions and
1. From the camera viewfinder, touch the Mode button
to change the mode to one of the following:
Auto: Automatically adjusts your camera to optimize color and
brightness. This is the default setting
Beauty face: Use this to take photos with lightened faces for
Sound & shot: Use this mode to enrich photos by adding
background sounds for a few seconds. The background sound
is recorded for up to 9 seconds after taking the photo.
Panorama: Use this to take wide panoramic photos. Touch the
Camera button to take a photo, and then move the camera in
any direction. When the blue frame aligns with the preview
screen, the camera automatically takes another shot in the
panoramic sequence. To stop shooting, touch the Camera
Sports: Use this to take fast action photos.
DRAFT - For Internal Use Only
Night: Use this to take photos in low-light conditions, without
using the flash. Touch the Camera button to take multiple
photos. Photos are automatically merged into a single photo.
at the top of the display to quickly change
Camera settings. Not all of the following options are available
in both still camera and video camera modes. The available
options vary by mode.
Configure Camera settings.
Activate or deactivate the flash.
Activate or deactivate the voice control to
Set a timer.
Select a resolution for videos.
Activate or deactivate the sharing options.
Hide Quick settings.