Installation Equipment; Cables And Accessories - Bosch Digital Congress Network Data Brochure

8. Installation equipment

8.1 Cables and Accessories

Introduction
The range of DCN installation accessories allows system
installation to be greatly simplified by the use of ready-
made cables with connectors. Trunk-cable splitters
allow trunk lines to be split and run in diverse direc-
tions, which means contribution units can be located
precisely where they are required in a conference venue.
DCN installation accessories are used for both fixed
and portable installations.
LBB 4114/00
Trunk-Cable Splitter
The LBB 4114/00 is used in conjunction with the sys-
tem installation cabling to divide the trunk-line cabling,
thus allowing system installers to achieve the optimum
layout of the trunk-line, and therefore contribution
equipment, to suit the conference venue. The trunk-
cable splitter comes complete with cable restraining
clamps and includes mounting holes for fixing to a
floor or wall.
Interconnection
• 2 m (78.74 in) long cable terminated with a moulded 6-pole
circular connector
• 6-pole circular connector for loop-through connections
• 2 x 6-pole circular connector for trunk cable splitting and
pulse regeneration purposes
Technical data
Dimensions (H x W x D) 35 x 49 x 140 mm
(1.37 x 1.91 x 5.51 in)
Weight approx. 0.3 kg (0.66 lb)
Colour charcoal (PH 10736)
DCN Data Brochure | Installation Equipment | 91