Audio Output Specifications - LG BP135 Owner's Manual

Audio Output Specifications

Jack/Setting
Source
PCM Stereo
Dolby Digital
PCM 2ch
Dolby Digital Plus PCM 2ch
Dolby TrueHD
PCM 2ch
DTS
PCM 2ch
DTS-HD
PCM 2ch
Linear PCM 2ch PCM 2ch
Linear PCM 5.1ch
PCM 2ch
Linear PCM 7.1ch
PCM 2ch
*1 The secondary and interactive audio may not
be included in the output bitstream if [Digital
Output] option is set to [BitStream]. (Except
LPCM Codec : the output always include
interactive and secondary audio.)
*2 This player automatically selects the HDMI audio
according to the decoding capability of the
connected HDMI device even though [Digital
Output] option is set to [BitStream].
*3 If the [Digital Output] option is set to [DTS re-
encode], the audio output is limited to 48 kHz
and 5.1Ch. If the [Digital Output] option is set
to [DTS re-encode], the DTS Re-encode audio
is outputted for BD-ROM discs, and the original
audio is outputted for the other discs (like
[BitStream]).
HDMI OUT
PCM Multi-Ch DTS Re-encode
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 5.1ch
PCM 7.1ch
y The audio is outputted as PCM 48 kHz/16 bit for
MP3/WMA file and PCM 44.1kHz/16 bit for Audio
CD during playback.
y You must select a digital audio output and
a maximum sampling frequency that your
Amplifier (or AV receiver) accepts using [Digital
Output] and [Sampling Freq.] options on the
[Setup] menu (page 20).
y With digital audio connection (HDMI OUT),
Disc Menu button sounds of BD-ROM may not
be heard if the [Digital Output] option is set to
[BitStream].
y If the audio format of the digital output does
not match the capabilities of your receiver, the
receiver will produce a strong, distorted sound
or no sound at all.
y Multi-channel Digital Surround Sound via digital
connection can only be obtained if your receiver
is equipped with a Digital Multi-channel decoder.
Appendix
* BitStream
3
DTS Dolby Digital
DTS Dolby Digital Plus
DTS Dolby TrueHD
DTS DTS
DTS DTS-HD
DTS Linear PCM 2ch
DTS Linear PCM 5.1ch
DTS Linear PCM 7.1ch
39
* *
1 2
6