Using Voicemail; Using Caller Id - Samsung SPH-m300 User Manual

M300 VMC Guide.book Page 21 Thursday, August 30, 2007 3:47 PM
Entering Numbers and Symbols
To enter numbers:
•
Select the Number mode and press the appropriate key. (See "Selecting a
Character Input Mode" on page 19.)
To enter symbols:
•
Select the Symbol mode. (See "Selecting a Character Input Mode" on page
19.) To enter a symbol, press the appropriate key indicated on the display.
Use the navigation key to scroll up or down to see additional symbols.

Using Voicemail

All unanswered calls to your phone are automatically transferred to your
voicemail, even if your phone is in use or turned off. For information on
configuring and retrieving your voice mail, see "Voicemail" on page 49.

Using Caller ID

Caller ID allows people to identify a caller before answering the phone by displaying
the number of the incoming call. If you do not want your number displayed when
you make a call, just follow these easy steps.
To block your phone number from being displayed for a specific outgoing call:
1. Press
6 MNO
Shift
2. Enter the number you want to call.
3. Press .
To permanently block your number, call the Customer Service department of your
network service provider.
Note: If you have not subscribed to Caller ID, and the backlight is set to turn off
after a period of time, pressing
press and hold
is turned off. To avoid this problem, set the backlight to "flip open". For more
information, see "Changing the Backlight Time Length" on page 79.
.
7
Space
PQRS
will switch the backlight back on. Either
or press twice to answer the second call when the LCD
Phone Basics 21