Pioneer VSX-45TX Service Manual page 147

5
8.2 DISPLAY
All the display information is explained and/or referenced here.
1 2
PRO LOGIC
SIGNAL
DIGITAL
AUTO
DTS ES EX
RF
MPEG AAC
DIGITAL
STEREO
ANALOG
DSP
SB CH
ON MOVIE
AUTO
MUSIC
OFF
L C R LFE
L S R
S S SP A B
13 12
1 SIGNAL SELECT indicators
Light to indicate the input signal you selected.
AUTO: Lights when the receiver is set to select the input
signal automatically.
DIGITAL: Lights when digital audio signals are selected.
ANALOG: Lights when analog signals are selected.
2 Digital format indicators
PRO LOGIC II: Lights during Dolby Pro Logic II
processing.
NEO:6: Lights during NEO:6 processing.
2 DIGITAL: Lights when a Dolby Digital signal is
detected.
dts: Lights when a DTS signal is detected.
ES: Lights when playing back a DTS ES signal.
EX: Lights when playing back a Dolby Digital EX signal.
STEREO: Lights during two-channel playback.
3 LOUDNESS indicator
Lights when LOUDNESS is on.
4 MIDNIGHT indicator
Lights when MIDNIGHT is on.
5 TONE indicator
Lights when the TONE control is on.
6 DNR indicator
Lights when DIGITAL NR is on.
7 TUNER indicators
STEREO: Lights when an FM stereo broadcast is
received in the auto stereo mode.
MONO: Lights when the tuner is set to receive FM
broadcasts and when MPX mode is selected.
TUNED: Lights when a broadcast is received.
8 Volume level indicator
9 MULTI ROOM indicator
Lights when the MULTI ROOM system is on.
5
6
3 4
LOUDNESS MIDNIGHT
Neo :6
11
6
7
5 6
TONE DNR ATT
10 Hi-BIT/SAMPLING indicator
Lights when a hi-bit/sampling mode is on.
11 DSP indicators
MOVIE: Lights when a MOVIE mode is selected. When
a DSP MOVIE mode is selected DSP will light with a box
around it.
MUSIC: Lights when a MUSIC mode is selected. When
a DSP MUSIC mode is selected DSP will light with a box
around it.
12 Program Format indicators
For Dolby Digital or DTS sources: these indicators
change according to which channels are active in the
source. When all three LS (left surround), S (surround)
and RS (right surround) light at the same time it means a
source with a 6.1 channel playback flag is being used.
L – Left front channel.
C – Center channel.
R – Right front channel.
LS – Left surround channel.
S – Surround channel or Surround back channel.
RS – Right surround channel.
LFE – Low Frequency Effects channel.
‡ – Lights when LFE signal is input.
13 SB CH indicators
Light to indicate the status of the surround back
channels.
AUTO – Lights when the SB CH MODE or VIRTUAL
SURROUND BACK mode is set to AUTO.
ON – Lights when the SB CH MODE or VIRTUAL
SURROUND BACK mode is set to ON.
OFF – Lights when the SB CH MODE or VIRTUAL
SURROUND BACK mode is set to OFF.
VSX-45TX
7
8
7
STEREO MONO
TUNED RF ATT
RDS EON
Hi-BIT/
SAMPLING
MULTI-ROOM
10 9 8
8
A
dB
B
C
D
E
F
147