York Fitness inspiration 100 Owner's Manual page 7

2. Attach the front post
1. While still in the carton, lift up the front post and connect the computer
cables as shown
2. Slide the front post tube into the front post mounting
3. Unpack the rest of the carton around the main frame
4. Secure the front post in place using the bolts and washers shown - be
sure to fit them in the same order as the diagram
5. Carefully lift the main frame out of the carton
3. Attach the stabilisers
1. Attach the front and rear stabilisers with the nuts, bolts and washers as shown in the diagram
!
2. Be sure to fit the parts in the same order as the diagram
Check the bolts are fully tightened by making sure they penetrate
through the top of the nut
40
9
8
7
4. Attach handlebars
1. Open the handlebar clamp bracket and place the handlebar inside
2. Close the clamp bracket and secure in place using the t-bar bolt
!
and washer.
Make sure T-bar bolts is
fastened tightly
24
8
7
40
9
8
7
4
28
!
Make sure the bolts are fully
tightened with the allen key
40
9
8
7
4
7
FIXINGS: FIXINGS:
Part
No.
24
x 4
Part
No.
8
x 4
Part
No.
7
x 4
FIXINGS: FIXINGS:
Part
No.
40
x 4
Part
No.
9
x 4
Part
No.
8
x 4
Part
40
No.
7
x 4
9
8
7
Part
No.
4
x 4
FIXINGS: FIXINGS:
Part
No.
7
x 1
7