Table of Contents
Advertisement
UX-G6/FS-G6
Continued
5
8
Rotate MULTI JOG dial ( < / > button on the remote
Rotate MULTI JOG dial ( < / > button on the remote
control also available) to select the minute of the
control also available) to adjust the volume level, then
timer-off time, then press SET button.
press SET button.
• You can adjust the volume within the range of “0” to
“50.” If you select “– –,” the volume is set to the
previous level when the unit is turned off.
6
Rotate MULTI JOG dial ( < / > button on the remote
control also available) to select the source, then press
After completing the settings...
SET button.
The daily timer indicator lights, and the setting items appear one
TUNER
TUNER
( MD )
CD
after another in the display window.
FM
AM
Turns off the unit (standby) if you have set the daily timer with
( AUX
the unit turned on.
AUX
TAPE
DIGITAL )
REC
TUNER FM: Tunes into a preset FM station. Go to
DAILY timer indicator
step 7.
TUNER AM: Tunes into a preset AM station. Go to
step 7.
If you press a certain button while Daily Timer is
operating
CD:
Plays a CD. Prepare a CD, then go to
The unit will not turn off automatically.
step 7.
(MD):
Plays a MD, only when XM-G6 MD
recorder connected. Then go to step 7.
To use the same Daily Timer settings repeatedly
TAPE:
Plays a tape. Prepare a tape, then go to
Once you have set Daily Timer, it remains stored in memory
step 8.
until you change it.
AUX*:
Selects “AUX” as the source. Make the
To activate the daily timer with the previous settings, follow
external equipment ready for playback.
the procedure below:
(AUX DIGITAL):
Selects an external digital audio
1
Press CLOCK/TIMER button repeatedly until
equipment as the source if connected.
“DAILY TIMER” appears in the display window.
* To use the external equipment with the Daily Timer,
it also has the timer function.
2
Press SET button to activate Daily timer.
7
If you have selected FM/AM as the source in the
The daily timer indicator lights, and the setting items
above step, select a preset channel.
appear one after another in the display window.
1) Rotate MULTI JOG dial ( < / > button on the remote
• To deactivate the daily timer, press CANCEL button
control also available) to select a preset channel.
in this step.
2) Press SET button.
If you have selected CD as the source in the above
step, select a track.
1) Rotate MULTI JOG dial ( < / > button on the remote
control also available) to select a track.
2) Press SET button.
27
Maintenance and Additional Information
General Notes
In general, you will have the best performance by keeping
your CDs, cassette tapes and the mechanism clean.
• Store CDs and cassette tapes in their cases, and keep
them in cabinets or on shelves.
• Keep the CD disc tray, and the cassette tapes tray
closed when not in use.
Handling CDs
• Only CDs bearing this mark can be
used with this system. However,
continued use of irregular shape
CDs (e.g. heart shape, octagonal)
can damage the system.
• Remove the CD from its case by
holding it at the edge while
pressing the center hole lightly.
• Do not touch the shiny surface of
the disc, or bend the CD.
• Put the CD back in its case after
use to prevent warping.
• Be careful not to scratch the
surface of the CD when placing it
back in its case.
• Avoid exposure to direct sunlight,
temperature extremes, and
moisture.
• To clean the CD
Wipe the CD with a soft cloth in a
straight line from center to edge.
DO NOT use any solvent — such as conventional
record cleaner, spray, thinner, or benzine — to
clean the CD.
29
Using Sleep Timer
Timer Priority
With Sleep Timer, you can fall asleep to your favorite music
Since each timer can be set separately, you may wonder
or radio program.
what happens if the setting for these timers overlaps.
Here are the priorities for each timer.
How Sleep Timer actually works
The system automatically turns off after the selected time
• Recording Timer has priority over Daily Timer and
length passes while playing any source.
Sleep Timer.
If Daily Timer is set to come on while Recording Timer
On the remote control only:
is operating, Daily Timer will not come on at all.
1
Press SLEEP button on the remote control
6:00
6:30
7:00
7:30
repeatedly to select the sleep timer.
Recording Timer
• Each time you press the button, the time length
Daily Timer
changes as follows:
10
20
30
60
90
120
Does not work.
If Recording Timer is set to come on while Sleep Timer
(Canceled)
is operating, Sleep Timer will be canceled several seconds
2
Wait for about 5 seconds after selecting the time
before Recording Timer comes on.
length.
6:00
7:30
6:30
7:00
When the sleep timer setting is completed, the display
window dims and just shows the remaining time until
Recording Timer
the shut-off time minute by minute like “SLEEP 30”
Sleep Timer
then “SLEEP 29”.
Canceled.
• To change the shut-off time, press SLEEP button
repeatedly until the desired time length appears.
• Sleep Timer has priority over Daily Timer.
If Daily Timer is set to come on while Sleep Timer is
• To cancel the setting, press SLEEP button repeatedly
operating, Daily Timer will not come on at all.
until the sleep timer indication disappears.
6:00
7:30
6:30
7:00
Sleep Timer
Daily Timer
Does not work.
Therefore, the equation is like this (high > low):
Recording Timer > Sleep Timer > Daily Timer
28
Handling Cassette Tapes
Types of Cassette Tapes
Cautions regarding handling
This cassette deck unit incorporates an Automatic Tape
Detection function. This mechanism uses the tape-type
• Do not touch the surface of the tape or pull the tape out
detection holes to distinguishes which type of tape was
of the cassette.
inserted, and sets the bias and equalizer to the optimum
• Tape spooled loosely around the hubs is likely to jam in
settings for that tape automatically.
the pinch rollers and capstans. Before loading the tape
The following types of tapes may be used with this cassette
into the cassette tray, take up the slack in the tape as shown
deck unit.
below.
Normal tape
TYPE I
BIAS: NORMAL
EQ:
120µs
Tape storage
• Place tapes in their cases for storage.
• Avoid storing tapes on top of TVs or speakers, in sunlight
Normal (No detection slots) Tab
or places of high temperature, or in humid or dusty areas.
(to prevent accidental erasure)
To prevent accidental erasure
High position (CrO
) tape
2
• Cassette tapes have tabs to prevent accidental erasure.
TYPE II
• If you remove the tabs after making a recording, the
BIAS: HIGH
cassette deck cannot be set to record when that tape is
EQ:
70µs
loaded. Remove the tabs so that valuable
recordings will not be accidentally erased.
Recording (erasure) is not possible when the tabs are
High position
removed.
detection slots
Metal tape
(only for playback)
TYPE IV
BIAS: METAL
EQ:
70µs
For reverse side (B)
For front side (A)
• To make another recording on a tape whose tabs have
been removed, cover the tab holes with adhesive tape.
Metal detection slots
Tape-type detection slot
• Certain early period Metal and High position
(CrO
) tapes may not have tape-type detection
Adhesive tape
2
slots. The cassette deck unit cannot obtain the
correct characteristics for these tapes.
• Ferrochromite (FeCr) TYPE III tapes cannot be
DO NOT cover the tape-type detection slots.
used with this cassette deck unit.
30
1-14
Hide quick links:
Advertisement
Table of Contents
