Front Indicator Setting - Pioneer PDP-507CMX Technical Manual

Integrator Mode

16) FRONT INDICATOR Setting

This function controls the flashing of the indicator on the front of the display.
Factory setting: ON
1 Enter the integrator mode.
(Refer to section 5.4.1, "About the Integrator Mode" (pg. 214).)
2 Select 'OPTION'.
3 Place the cursor on 'FRONT INDICATOR' then press the
[SET] button to change the setting.
Each time the [SET] button is pressed, the setting changes
as shown below.
3 ON
OFF 2
ON: Normal LED function
OFF: Lights red during standby
The 'FRONT INDICATOR' setting is common for all inputs.
Note
Regardless of the ON/OFF setting, during POWER MANAGEMENT operation and shutdown, the green indicator
flashes.
238
Screen 3
I N T E G R AT O R
P I C T U R E S C R E E N
F A N C O N T R O L
O S D
F R O N T I N D I C AT O R
C O L O R MO D E
P R O U S E
F R C
CHANGE
SET
I N P U T 1
S E T U P O P T I O N
:
A U T O
:
O N
:
N O R M A L
:
O N
EXIT
MENU