Video Output Connector [1] Rgbquantizatonrange; Video Output Connector [1] Resolution - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set
Contents

Video Output Connector [1] RGBQuantizatonRange

Devices connected to an HDMI output should follow the rules for RGB video quantization
range defined in CEA-861. Unfortunately some devices do not follow the standard and this
configuration may be used to override the settings to get a perfect image with any display. The
default value is set to Full because most HDMI displays expects full quantization range.
Requires user role: ADMIN
Value space: <Auto/Full/Limited>
Auto: RGB quantization range is automatically selected based on the RGB Quantization
Range bits (Q0, Q1) in the AVI infoframe. If no AVI infoframe is available, RGB quantization
range is selected based on video format according to CEA-861-E.
Full: Full quantization range. The R, G, B quantization range includes all code values (0 -
255). This is defined in CEA-861-E.
Limited: Limited Quantization Range. R, G, B quantization range that excludes some code
values at the extremes (16 - 235). This is defined in CEA-861-E.
Video Output Connector 1 RGBQuantizatonRange: Full
Example:

Video Output Connector [1] Resolution

Set the resolution and refresh rate for the connected screen. This value is fixed and cannot be
changed.
Requires user role: ADMIN
Value space: <Auto>
Video WallPaper
This has been replaced with the UserInterface Wallpaper setting.
D15106.02 SX10 Quick Set Administrator Guide TC7.2, AUGUST 2014.
Introduction Web interface System settings System settings
www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
102
Administrator Guide
Setting passwords Appendices